Calculated Industries 8110 Center Mark Drywall Recessed Lighting Cutout Magnetic Locator Tool for Non-LED Cans , Yellow


Make sure this fits by entering your model number.
PERFECT DRYWALL CUTOUTS FOR RECESSED LIGHT FIXTURES — get professional results you can be proud of in half the time with NO measuring! Powerful rare-earth magnets find eachother through the sheetrock eliminating the need for time-consuming, error-prone measurements
TWICE AS EASY AND ONLY HALF THE LIFTING of other marking methods. Save time and achieve perfect cutouts for all your non-LED can-light fixtures

Amazon.com Price: $16.88 (as of 13/08/2022 04:19 PST- Details)

Now Find & Mark Hidden Recessed Lighting Cans TWICE as Easily – With No Measuring! Perfect for first-time DIYs or the experienced handyperson. The Center Mark is for non-LED recessed can-light fixtures. The Center Mark locator uses powerful rare-earth magnets to help you accurately locate and cut perfect light fixture holes in drywall with NO MEASURING required. Eliminates costly measuring errors, keeps wasted drywall sheets out of landfills and drastically improves your project’s productivity. • 3 FOOLPROOF STEPS – Screw the Center Mark targets into your non-LED recessed can light, install the drywall, locate the targets and cut them out. Professional results every time, quickly and easily. • TWICE AS ACCURATE – say goodbye to mis-measured and mis-cut holes in your ceiling or having to patch or buy oversize trim rings. With Center Mark you’ll cut perfect ceiling can openings every time. • HANG IT ONCE, CUT IT RIGHT – while other drywall locator methods (i.e., lipstick) require you to lift and lower heavy drywall sheets multiple times to mark, cut, then install, with the Center Mark you simply put it up once, find and cut the hole and you’re done. • HALF THE LIFTING – because you only lift the sheetrock once to install it you not only finish in half the time but with much less fatigue or chance of injury or damage to fragile drywall. • COMES COMPLETE — This handy kit includes 2 targets that screw into non-LED sockets and enable you find two recessed lighting fixtures at a time for even greater time savings. • BONUS USE – the powerful neodymium rare earth magnet in the Locator also works as a super-strong stud finder that solidly grabs on to screws or nails in a stud. Easily hangs hands-free for convenient pencil marking. Why make drywall ceiling installation harder than it has to be? Let Center Mark take the guesswork and the grunt work out of recessed can lighting cutouts. Click the Add to Cart button now! Copyright 2021 Calculated Industries. All rights reserved.

Make sure this fits by entering your model number.
PERFECT DRYWALL CUTOUTS FOR RECESSED LIGHT FIXTURES — get professional results you can be proud of in half the time with NO measuring! Powerful rare-earth magnets find eachother through the sheetrock eliminating the need for time-consuming, error-prone measurements
TWICE AS EASY AND ONLY HALF THE LIFTING of other marking methods. Save time and achieve perfect cutouts for all your non-LED can-light fixtures
GET PROFESSIONAL RESULTS you can be proud of the first time (even if it’s your first time hanging drywall) and on every job after using our foolproof patented technology that snaps into place showing you exactly where the center of the can is to be cut
PAYS FOR ITSELF – avoids costly and embarassing measuring errors and helps you finish jobs more quickly without need for patches or repairs! Plus it helps our environment by keeping miscut drywall or paneling sheets out of landfills
FITS 4″, 5″, 6″ recessed (Non-LED) can light fixtures. Two included magnetic Targets screw into bulb sockets.

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Calculated Industries 8110 Center Mark Drywall Recessed Lighting Cutout Magnetic Locator Tool for Non-LED Cans , Yellow”

There are no reviews yet.

SHOPPING CART

close